A Guide to Achieving Amazing Soft Washing Results
Choosing the Right Pressure Washer for Soft Washing
When soft washing, selecting a pressure washer that can change to low PSI is very important. Look at the size of the surface, how dirty it is, and what type of pressure washer you need. The right pressure washer makes sure your cleaning works well without harming the property’s condition. To prevent harm to surfaces, it is important to have precision, care and the correct equipment during the process of soft washing.
Prepare the Surface for Cleaning
Before you start with the soft washing, get everything ready for cleaning.
First, protect nearby places like plants and delicate surfaces by using plastic sheeting or barriers. Close windows and doors very tightly so no water can go inside your home. Make sure the area is ready before spraying to avoid any damage to any fixtures with the solution’s chemicals.
For cleaning solutions, you must use the mixture as instructed by the manufacturer to avoid causing harm to the home’s siding, and make sure that the solution is mixed in the correct manner.
Don’t put the solution on the siding all at once, instead do it part by part for an even layer. Allow time for the solution to work – let it sit for 5 to 10 minutes and break down any dirt, mildew or algae present.
Maintain Proper Distance and Pressure
After you prepare the surface with solution, maintain distance before pressure washing. You handle the strength of spray according to what kind of surface you are cleaning. When you deal with surfaces that are more sensitive, use less PSI. Begin with low pressure and gradually increase the PSI for removing stubborn stains.
Rinse Thoroughly
Clean the surface entirely so that all leftover components are removed. When you wash the solution, pay attention to:
- Rinsing – Ensure that all surface fixtures and siding are rinsed to avoid streaks from leftover residue.
- For Water Pressure – Rinse with low PSI that’s gentle on the dirt, preventing damage from high-pressure rinsing.
- Cleaning Solutions: Ensure that all of the cleaning solution is rinsed away completely during the rinsing phase to avoid any chemical residue.
- Safety Measures – Be sure to apply safety measures such as wearing protective equipment and performing rinsing tasks in a well-ventilated area to steer clear of any hazardous effects from the chemicals present in the cleaning solution.
Inspect and Perform Touch Ups
Once the soft wash is done, carefully look over the surface. Find spots that require touch ups by inspecting closely. For hard stains not fully cleaned during the first soft wash, perform spot treatment soft washing to clean the remaining siding entirely on the second soft wash.
Wrightlook Pressure Washing is your Top Soft Washing choice
For the finest soft washing services, Wrightlook Pressure Washing is your top choice. Wrightlook Pressure Washing pays attention to safety by taking all necessary safety measures. Our crew covers plants, furniture and delicate surfaces around prior to beginning the soft washing procedure to guarantee careful protection of the area. Contact Wrightlook Pressure Washing today for an incredible soft wash result on your property.
